ITX Minecraft Ore PC case

Fan guard available here: https://www.prusaprinters.org/prints/97849-200mm-fan-cover-guard-hex-mesh

Notes:

Install RGB LEDs and a white diffuser to recreate effect. Add “shimmer” effect in RGB software for best result. This case has quite decent airflow if configured correctly. Leave the top holes open OR use semi-permeable fabric on panels. Add ≥ 1cm of clearance with feet and the 200mm fan on the bottom will do the rest.

Printing:

Design is quite forgiving. Fan and standoff screws will self tap. Print ITX tray with 100% infill, panels with as little infill as your printer will allow to remain good quality.