Anycubic Mega Zero v1.0 Bed Thumbwheels

Anycubic Mega Zero v1.0 Bed Thumbwheels are a remix - I made these taller with inset M3 nuts specifically for Mega Zero v1.0's with Heated Bed upgrades that larger than the stock bed (via adapters).

I recommend these be printed in ABS+ due to the heat that gets transmitted through the Bolt into the Nut.

Just use a long M3 Bolt to pull the nut down cleanly inside the cavity.

I Printed these in eSun ABS+ with 2 walls, 2 top/bottom layers and 50% cubic infill.

Print Settings

Printer:

Anycubic Mega Zero

Rafts:

No

No

Resolution:

0.2mm

50% Cubic

Filament: eSun ABS+ White

Notes:

I Printed these in eSun ABS+ with 2 walls, 2 top/bottom layers and 50% cubic infill.