ENDER 3 V2 Raspberry Pi 4 Case With Fans

ENDER 3 V2 Raspberry Pi 4 Case

Notes:

this case is designed to hold a Raspberry Pi 4,2 30mm fans and 2 Buck Converters
I'm intending to use the Arduino to prototype some different/unusual sensor integrations to the Printer

print Settings:
nozzle diameter: 0.80mm
layer height: 0.5mm
infill: 25%
support: NO
walls: 1.6mm
top and bottom layers: 3 1.5mm
material: PLA

Parts Needed:
Raspberry Pi 4: https://tinyurl.com/9tjh833d
30mm Fans: https://tinyurl.com/psz73aa
Nylon Spacers/Screws: https://tinyurl.com/ja6cd65v
Buck Converters: https://tinyurl.com/2tvx2kya
M3 Self Tapping Screws: https://tinyurl.com/2zfepc9s

Special Instructions:
add 2 nylon nuts underneath all components

please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs

please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones
https://paypal.me/3DCarter383?locale.x=en\_GB

Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

No

Supports:

No

200

Infill:

38