Kaufland glue gun stand with glue stick compartment

This is a 2-part glue gun stand. I designed it to hold the FMGG6996 (TY-G6006) 80W glue gun, which I bought in Kaufland, but I think Lidl had the similar sized ones. The gun's front part, which goes in the stand is 30x46 mm, and the stand is 35x50 mm inside.

There are 2 parts, which can be used separately:

• Stand, which holds the gun
• Box, which has a space for 11 mm glue sticks

Both are assembled with 4 M3x10 screws. Holes in the box are 2,5 mm in diameter, so the screws should thread directly into them without issues, but you might run a 2,5 mm drill through to clean them.

If you want, you can use the stand without the box and screw/glue it whenever you want.

The parts were designed to print without supports

The pictures show the first design, which has been slightly improved - the box is taller, so it can hold 2 stacks of sticks and the stand is a little beefier now.

STEP files are included - feel free to adapt the parts to your needs if you'd like to.

Print instructions

Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0,1-0,5
Filament: Prusament PETG Neon Green
Notes:

I've printed this with Prusament Neon Green PETG with 0.6 mm nozzle and 0.5 mm layer height.