Prusa Nutcracker

Welcome our new design of Nutcracker, you can easily and quickly crack walnuts and other nuts. The 3D model consists of 6 printed parts, and screws.

Easy to print.
No supports needed.
We recommended printing this model from Prusament PC Blend (PETG optional) with a minimum of 4 perimeters.
Designed by our engineers.

You will also need:

Screws:

• 1x M3 x 30 (DIN 912)
• 2x M4 x 40 (DIN 912)
• 2x M8 x 40 (DIN 10642)

Nut:

• 1x M3 nut
• 2x M4 nut
• 2x M8 nut

Happy printing :)

Print instructions

For printing from PC Blend
We recommend placing the objects into the center of the print sheet to achieve a good adhesion thanks to even heat distribution. A useful addition is a skirt, a thin wall around the object. It creates a microclimate around the printed object and blocks air circulation.

Do you need to add the Prusament PC Blend print profile into PrusaSlicer? Make sure you’re running PrusaSlicer 2.2.0 or newer. Go to Configuration - Configuration Wizard - Filaments - PC - check the Prusament PC Blend option and press Finish. Now, PC Blend will be available in the list of materials.

Used filament:
Prusament PC Blend Natural
Prusament PC Blend Jet Black
Prusament PC Blend Urban Grey

Designed by Josef Franc (ropak).