Raspberry Pi Camera bed mount for Prusa I3 MK3S printers

I made only the arm that attaches to the Prusa I3 MK3S bed, the Raspberry Pi Camera enclosure was made by dragsterbox and the swivel was made by Cornflakesninja (https://www.thingiverse.com/thing:2956323)

Other reference design: https://www.thingiverse.com/thing:3384804

This arm goes straight to one of the front legs of the bed base, it should be printed in ABS or PETG because of the bed heat, it attaches using two zip ties.

Both the swivel and the camera enclosure can be printed in PLA.

You have to use two M3 screws, one for mounting the swivel part to the arm mount and the other for the camera enclosure and the swivel, when mounting the Raspberry Pi Camera inside the enclosure you can glue it or use 4 small screws.

UPDATE 01-08-2019: Designed a housing for the wide angle pi camera and added more sizes for the bed mount arm. Also designed a mount for the Microsoft Lifecam Studio webcam.

Print instructions

Category: 3D Printer Parts Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2

Infill: 30%

Filament: Cheap brand ABS Brown
Notes:

Please rotate properly before printing