Mini+ Adapter for Hemera Extruder

Using these prints you can replace the stock extruder on the mini+ with an E3D Hemera Bowden kit. Replace the stock MINI-z-carriage-rear part with the MINI-z-carriage-rear version provided here. See [the MINI kit assembly manual](https://help.prusa3d.com/guide/3-x-axis-extruder-assembly_199519#200332) for how to install this part.

Additional Hardware

4x 12mm M3 Socket Head Screws (mcmaster/90751A113)

2x 16mm M3 Socket Head Screws (mcmaster/91292A115)

All other screws should come with the Hemera kit or can be repurposed from your existing mini.

Credits

Special Thanks to Andreas Reiswig for the excellent 3D model of the Hemera.