Y Smoke splitter

Thought I'd create a Y splitter fitting to distribute the smoke better. Two pipe tubes can be attached to different locations.

The holes are dia 6.3, after printing tho the hole is only dia 5.23

The tube I'm using is dia 6.25

My tube is a push fit so this drop in diameter doesn't bother me. If it is a problem for your tube, just carefully use a heat source to soften the filament and push your tube into the hole.

My first print was still warm when I forced the tube into the hole, and it opened it up.

Print Settings

Rafts:

Yes

Supports:

No

Resolution:

0.2

Infill:

50% to solid

Filament: filament PLA

Notes:

As a test, this was only set at 50% infill. Weight isn't really a concern, but I just wanted to test the theroy.

Post-Printing =============

See summary notes on bore size after printing.

Thanks.

Category: Hobby