Steampunk Button II

Used a template of an existing button and have customized it to make my own design out of it. Looks certainly wonderful when this is printed with copper-filled filament or painted accordingly. 

Original: https://www.knoepfe.de/Steampunk-Knopf-aus-Metall-in-Zahnradform-messing

• Ø15mm | 4,5mm thickness
• due to the very fine details i would recommend a 0,2mm Nozzle … 
• ... if not available I have created a 50% larger version (Ø22mm | 4,5mm thickness)
• Works without support!

See also: https://www.prusaprinters.org/de/prints/120963-steampunk-button-i