Voron V0.1 Tophat Spacer with Hinges

Voron V0.1 Tophat Spacer with Hinges
Makes the tophat higher, stiffer and adds a hinge.

Therefore its a lot easier to open the top and adds 20mm more space in the top for cable routing and higher Extruders.

I added now also a Version which is split for people with small printers who cant print the spacer in one part and another version where the chamfer is turned around so you can use it to mount LEDs. This was a request by some people. I designed these other parts but never tested them. So please give me some feedback if something there needs to be improved.

There are now 4 Versions:

1.Standard Version (which I also use):

It has some guides at the lower side that help with alignment and stiffness.  These guides align with the slots in the profiles of the printer and therefore are only available in this version. Minimum 238x250 printbed needed for those parts.

2. The Version for the LED mounts:    

Those angled surfaces are pointing downwards here  which allows the mount of LEDs there. Minimum 238x250 printbed needed for those parts.

3. The Split version (which needs to be screwed together with connector plates): This is for people who can't fit the whole part onto their printer and therefore want to split it up.  Those connectors may be not as clean as the Standard Version, but with some nice color schemes they still look nice.  The front connector needs to be outside to give the printhead enough place. It was designed to have the heatinserts in the spacer and the screws inserted from outside. But inserting the screws from the inside seems to work aswell and looks quite clean.  Minimum 120x131 printbed needed for those parts.

4. The half version (Datafreak Remix):

There is also a Split version where the part is only split into 2 Parts. Its much cleaner than the 4 part split. There is nearly nothing of the split visible if you can fit those halfs onto your printer. The parts are still smaller and easier than the whole version. Minimum 238x131 printbed needed for those parts. I added the step and stl aswell here, but you can find the original remix here:  https://www.prusaprinters.org/prints/143544-remix-of-voron-v01-tophat-spacer-with-hinges/files

So just choose the Version that you think fit the best for you and happy printing. And feel free to make and share your own remixes as always. That's why I always provide Step files. If you need other formats just let me know and I'll see what I can do.