Bag clamp [hinged, print in place]

The model in the pictures is printed on a 0.8 nozzle and 0.25 layer height and 1mm layer width in PLA. But the model should work with the normal 0.4mm or 0.6mm nozzles as well. Just slice for your printer. You can use 0.25mm layer height on those nozzles as well.

Tolerance in the model is set to 0.25mm.

After printing open the model to 90 degrees. You might need a little force and it might make a “crack” sound when breaking loose in the hinge. This is normal, only happens the first time and does not damage the model. But be careful.